UZI SMG Receiver Repair Section

(2 customer reviews)


Out of stock

Join the waitlist to be emailed when this product becomes available


NEW UZI repair section receiver. 80% receiver. Standard full size UZI. This uzi repair section is an awesome tool for many home builders. Nearly an entire 80% receiver, without the rear sight section and the front trunnion part of the receiver. Just Weld on the rounded front section from your kit and the rear plate, rear section, barrel ramp, and a few other things will need to be installed as well. Made in America from high quality steel. This is a beautiful stamping. NO FFL or paperwork is required.

Ben Edwards Designs Product Catalog

Uzi – Wikipedia

BWE Firearms & Parts | Longwood FL | Facebook






The Uzi ,  Ūzi; officially cased as UZI) is a family of Israeli open-bolt, blowback-operated submachine guns and machine pistols first designed by Major Uziel “Uzi” Gal in the late 1940s, shortly after the establishment of the State of Israel. It is one of the first weapons to incorporate a telescoping bolt design, which allows the magazine to be housed in the pistol grip for a shorter weapon.

The Uzi prototype was finished in 1950. It was first introduced to Israel Defense Forces (IDF) special forces in 1954, and the weapon was placed into general issue two years later. The IDF supplied Uzis to rear-echelon troops, officers, artillery troops and tank crews, as well as a frontline weapon by elite light infantry assault forces.

The Uzi has been exported to over 90 countries. Over its service lifetime, it has been manufactured by Israel Military Industries, FN Herstal, and other manufacturers. From the 1960s through to the 1980s, more Uzi submachine guns were sold to more military, law enforcement and security markets than any other submachine gun ever made.


Technical Information



In service 1954–present
Designer Uziel Gal
Designed 1950
Manufacturer Israel Military Industries
Israel Weapon Industries
Licensed by:
FN Herstal
Z111 Factory
Lyttleton Engineering Works
Group Industries
Produced 1950–present
No. built 10,000,000+
Variants See Variants
Mass 3.5 kg (7.72 lb)
Length 445 mm (17.5 in) stockless
470 mm (18.5 in) folding stock collapsed
640 mm (25 in) folding stock extended
Barrel length 260 mm (10.2 in)
Cartridge .22 LR
.41 AE
.45 ACP
9×19mm Parabellum
9×21mm IMI
Action Blowback, open bolt
Rate of fire 600 rounds/min
950 rounds/min Mini Uzi
1200–1500 rounds/min Micro Uzi
Muzzle velocity 400 m/s (1,300 ft/s) (9mm)
Effective firing range 200 m
Feed system 10-round box magazine (.22 and .41 AE)
12-, 16-, or 22-round box (.45 ACP)
20-, 25-, 32-, 40-, or 50-round box (9×19mm Parabellum)
Sights Iron sights





The Uzi uses an open-bolt, blowback-operated design, quite similar to the Jaroslav Holeček-designed Czech ZK 476 (prototype only) and the production Sa 23, Sa 24, Sa 25, and Sa 26 series of submachine guns. The open bolt design exposes the breech end of the barrel, and improves cooling during periods of continuous fire. However, it means that since the bolt is held to the rear when cocked, the receiver is more susceptible to contamination from sand and dirt. It uses a telescoping bolt design, in which the bolt wraps around the breech end of the barrel. This allows the barrel to be moved far back into the receiver and the magazine to be housed in the pistol grip, allowing for a heavier, slower-firing bolt in a shorter, better-balanced weapon.

The weapon is constructed primarily from stamped sheet metal, making it less expensive per unit to manufacture than an equivalent design machined from forgings. With relatively few moving parts, the Uzi is easy to strip for maintenance or repair. The magazine is housed within the pistol grip, allowing for intuitive and easy reloading in dark or difficult conditions, under the principle of “hand finds hand”. The pistol grip is fitted with a grip safety, making it difficult to fire accidentally. However, the protruding vertical magazine makes the gun awkward to fire when prone. The Uzi features a bayonet lug.


2 reviews for UZI SMG Receiver Repair Section

  1. Sean prasky

    My shop uses only thier reciver sections for custom builds, we actually used one of his prototypes and it works perfect!

  2. Arcana

    I cannot speak more constructively about how helpful these repair sections are. Dimensionally extremely accurate. Ready to weld and extremely helpful in the build process. Save yourself a lot of time and energy and pick one up today

Add a review

Your email address will not be published. Required fields are marked *